Strike Extensions and Filler Plates

Active Strike Extensions and Filler Plates are designed to fill excessive clearances on fire rated frames, at the strike, up to 90 minutes. Various sizes available, designed to be paired with Active Gap Fillers.

2 Sizes available: 4 7/8” x 1 5/8” &  2 3/4” x 1 7/8”

1/8”- 1”

INTERTEK TESTED AND CERTIFIED UP TO 90 MINUTES ON FIRE RATED FRAMES.

* THIS PRODUCT WILL MEET THE REQUIREMENT OF UL 10C, UBC 7-2, NFPA 252 AND NFPA 80

Clear

2019-NFPA 80

  • 5.2.3.5.2 (9) Latching Hardware operates and secures the door when it is in the closed position.
  • 6.3.1.7 Clearances
    • 6.3.1.7.2 The clearances between the top and vertical edges of hollow metal doors and frame, and the meeting stiles of doors swinging in pairs, shall be 1/8″ – 1/16″.
    • 6.3.1.7.4 HPDL-faced doors, flush wood doors, and stile and rail wood doors with fire ratings greater than 1∕3 hour shall not have clearances greater than 1∕8 in. (3.18 mm) between the door and frame, regardless of the door frame construction, and the meeting stiles of paired doors.
    • 6.3.1.7.5 Door leaves constructed of other materials shall not have clearances greater than 1∕8 in. (3.18 mm) between the top and vertical edges of doors and meeting stiles of paired doors, unless otherwise permitted in the door frame, door, and latching hardware manufacturers’ published listings.
  • 6.4.4.8 Strike Plates shall be secured to the frame with steel screws or other types of screws indicated by the manufacturer’s published listings or label service procedure.

2016-NFPA 80

  • 5.2.3.5.2 (9) – Latching Hardware operates and secures the door when it is in the closed position.
  • 6.3.1.7.2 – The clearances between the top and vertical edges of the door and frame, and the meeting edges of doors swinging in pairs, shall be 1/8” – 1/16” for steel doors and shall not exceed 1/8” for wood doors.
  • 6.4.4.8 – Strike Plates shall be secured to the frame with steel screws or other types of screws indicated by the manufacturer’s published listings or label service procedure.

2013-NFPA 80

  • 5.2.3.5.2 (9) – Latching Hardware operates and secures the door when it is in the closed position.
  • 6.3.1.7.1 – The clearances between the top and vertical edges of the door and frame, and the meeting edges of doors swinging in pairs, shall be 1/8” – 1/16” for steel doors and shall not exceed 1/8” for wood doors.
  • 6.4.4.8 – Strike Plates shall be secured to the frame with steel screws or other types of screws indicated by the manufacturer’s published listings or label service procedure.

2010-NFPA 80

  • 5.2.4.2 (8) – Latching Hardware operates and secures the door when it is in the closed position.
  • 6.3.1.7.1 – The clearances between the top and vertical edges of the door and frame, and the meeting edges of doors swinging in pairs, shall be 1/8” – 1/16” for steel doors and shall not exceed 1/8” for wood doors.
  • 6.4.4.8 – Strike Plates shall be secured to the frame with steel screws or other types of screws indicated by the manufacturer’s published listings or label service procedure.

Custom Orders

  • Do you have custom requirements?

Additional Support Products